Posts: 172
Threads: 19
Joined: Dec 2010
I neeed help.
Whats the average height of a story in an industrial building in the USA.
I mean a building like this one:
http://www.flickr.com/photos/atthebottom...otostream/
Thank you.
Posts: 2,271
Threads: 155
Joined: Dec 2008
That's probably an eight foot front door. The windows look similar, so you are looking at ~10 feet per floor?
Andrew
I think the standard story height in commercial buildings is 12 feet, so that may be the case here.
Posts: 2,724
Threads: 160
Joined: Dec 2008
JWB is right when we estimate the length of a wire pull we figure 12 feet per floor.
My other car is a locomotive, ARHS restoration crew
Posts: 172
Threads: 19
Joined: Dec 2010
Thank you for help.
pics of the reason for this question will follow.
Posts: 5,263
Threads: 195
Joined: Apr 2009
Joerg, if in doubt it is often a good hint to have a parking limousine immediate in from of the building. You may print a photo, measure the length of the car, rotate it 90° and use that known length to estimate the height of the levels of the building. I used that method for my LA buildings last year.
Reinhard
Posts: 68
Threads: 2
Joined: Jul 2009
Look up 666 Kentucky Ave Indianapolis, IN
Seriously 666.
That's where the building was. It was torn down a few years ago. Its not far from where the Indianapolis Colts NFL team's stadium was built a few years back. This building is actually very well documented on the internet because of its look and easy access. Google Street view has very clear pictures of it, as do a lot of urban explorer types. Hetherington and Berner.
Posts: 1,682
Threads: 101
Joined: Dec 2011
e-paw Wrote:JWB is right when we estimate the length of a wire pull we figure 12 feet per floor.
That's quite right and standard for this era. I checked your picture and it fits the building. Must be about 26 feet high (not counting the third storey).
The easiest way is to calculate by counting brick rows. 3 bricks piled up equal about 8 inches, they are also 8" in length. Bricks on the third storey are easy to distinguish for this purpose. If you have access to good pictures (via Google Street View), you will be able to measure precisely every details, windows, door, etc...
Good luck
Matt