04-26-2010, 07:42 PM
nice job
My other car is a locomotive, ARHS restoration crew
Nachoman's caboose thread
|
04-29-2010, 04:06 PM
Here is another caboose, HOn3 #451. It was built from a standard gauge bachmann bobber caboose, and probably previously offered by AHM or other manufacturers. I see these at train shows all the time, and they are relatively simple to convert to HOn3. The width scales out to about 9' - a little wide, but acceptable if one is on a budget and in need of a generic (non D&RGW) HOn3 caboose.
--
Kevin Check out my Shapeways creations! 3-d printed items in HO/HOn3 and more! <!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
04-30-2010, 03:58 PM
Nice little hack. Reminded me of this guy:
I found this in some shots of the timesaver layout. I really like the look of your end ladders...may need to add some to this little guy. It's one of two items lettered for the Big Tujunga Lumber Company...the other is the water car next to it in the picture. Also, I think I found a prototype of your caboose in the restored B&O roundhouse, in a recent issue of Trains or Raifan. Perhaps a web search will turn up an image or two. It was a B&O caboose, btw. Galen
I may not be a rivet counter, but I sure do like rivets!
05-01-2010, 06:03 PM
Back to the standard gauge caboose -
I painted the roof black, and the grab irons white. I also bent some railings for the platform ends, and scratchbuilt a battery box. I need to add a brakestaff to each platform, and ladders to each end. I also need to add roof grab irons and details. I think I will leave the cast-on brake details under the car. The cost of all those detail parts adds up, and frankly the underbody details aren't that visible. The only reason I have added them to other cars is because they are more visible, or because the original car either completely lacked those details, or because those details were extremely crude.
--
Kevin Check out my Shapeways creations! 3-d printed items in HO/HOn3 and more! <!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
05-01-2010, 07:59 PM
Great job on the battery box. And great job on all the rest too! Looking forward to seeing your ladders. Gonna scratchbuild them a la DocWayne?
Three Foot Rule In Effect At All Times
05-01-2010, 08:23 PM
Gary S Wrote:Great job on the battery box. And great job on all the rest too! Looking forward to seeing your ladders. Gonna scratchbuild them a la DocWayne? Thanks, Gary. I am pleased with the way it looks so far. All I am looking for is a cheap, simple caboose that looks well enough. I have a bunch of plastic ladders I bought for another project, so I will probably just use more of those. That is what I uses on the narrow gauge caboose posted above.
--
Kevin Check out my Shapeways creations! 3-d printed items in HO/HOn3 and more! <!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
05-01-2010, 08:51 PM
That looks beautiful Kevin! Crisp and neat;y done!
Ralph
05-03-2010, 12:44 AM
It's gettin there...
Galen
I may not be a rivet counter, but I sure do like rivets!
05-27-2010, 08:56 PM
Lookin' mighty good there, Kevin Nachoman! I'm likin' it ... but then, I'm partial to any Reading, LV, LNE, ETC. equipment. I have a couple NM-Class cabeese myself.
Now, for a little inspiration ... a prototype for your NMb class wood crummy ... biL
Lehigh Susquehanna & Western "America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves." ~~Abraham Lincoln
05-27-2010, 09:07 PM
Hmm. I think I need to modify the end railings for the ladders, as your photo suggests. What a great photo, thanks!
--
Kevin Check out my Shapeways creations! 3-d printed items in HO/HOn3 and more! <!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
05-27-2010, 09:17 PM
Not a problem ... Happy to help!
I skulk around, looking for reference for just about anything Reading Company. If I stumble on something that is L&NE or LV or CNJ that is camelback, NM-class caboose or little bobber, or a nice photo showing Upstate Pennsylvania countyside, i.e., Tree-covered Pocono/Appalachian Mountains ... the image ends up in one of my "Prototype Reference" files. Then all I have to do is remember I have it ... no mean feat for this ADD-riddled brain! :mrgreen: biL
Lehigh Susquehanna & Western "America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves." ~~Abraham Lincoln
12-04-2010, 03:21 PM
In addition to my Shay, this project has been on the workbench for awhile, so i decided to pull it out and start working on it again.
--
Kevin Check out my Shapeways creations! 3-d printed items in HO/HOn3 and more! <!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m --> |
« Next Oldest | Next Newest »
|