Modular railroading in Plymouth UK
#1
Yesterday I attended our monthly NMRA-BR division meet in Plymouth, all very pleasant.

During our meets, we set up a modular layout , based on the specs of RS Tower and NMRA-BR. Depending on availability the layout varies a bit each month, but yesterday the layout was made up out of:
Mike Ruby's 11th Avenue module
Our club's Lipson Junction crossing module
Peter Lloyd-Jones' Lloyd Yard.
Pete Saunders' Rocklin
and a storage yard called 'Western Yard' (which is one half the of the storage from our old oval shaped layout 'Anson' ).

Yesterday I operated a train headed by two SP GP9's, originating from Western Yard, with approx 9 cars. It ran via the crossing to 11th Avenue, dropped off 4 cars, and picked up 4 others, then back via Lipson Junction towards Lloyd yard, set out 3 cars, pick up 3, onwards then via the Junction and cross over to Rocklin, also here 4 cars were set out, and 4 picked up, and finally back to Western Yard.
We operate with prototypical speeds, and under dispatcher control, so clearance had to be requested in order to travel to the next destination. This results in the above sequence taking approximately 1 hour and 15 minutes.

Here is a very short video made of some traffic at Lipson Junction. The turnouts and signals here are under dispatcher control with the aid of JMRI running on a laptop and connected to the DCC system. (you can see the dispatcher Peter LJ in the background behind his desk, somewhat hidden by the depot building).

<!-- m --><a class="postlink" href="http://youtu.be/_P1ILJ_ATD8">http://youtu.be/_P1ILJ_ATD8</a><!-- m -->

Koos
Be sure to visit my model railroad blog at <!-- m --><a class="postlink" href="http://www.namrr.blogspot.com">http://www.namrr.blogspot.com</a><!-- m -->
Reply
#2
Nice! I enjoyed the video! Thumbsup
Reply
#3
If your group is able to have the drive and focus to put together a modular layout and operate it once a month, that's quite something!
Reply
#4
Thanks guys,

yes we do it monthly, but it's not a huge undertaking. Some of the boards are in storage at the location (a community centre) so it helps in transport, it takes on average 1 to 2 hours to set up, depending on the amount of boards and people in attendance. (Set up starts at 8AM or shortly thereafter), so we're usually operating by 10AM ish, until 4PM, and then take down.

The room is about 50 x 20 feet (very rough estimate), so it's not a huge layout, but keeps us more than entertained. :-)

Here's an overview of an earlier meet: <!-- l --><a class="postlink-local" href="http://bigbluetrains.com/forum/viewtopic.php?f=19&t=7203">viewtopic.php?f=19&t=7203</a><!-- l -->

Koos
Be sure to visit my model railroad blog at <!-- m --><a class="postlink" href="http://www.namrr.blogspot.com">http://www.namrr.blogspot.com</a><!-- m -->
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)