Posts: 2
Threads: 1
Joined: Feb 2013
Was wondering what lights would have been used (if any) on a B unit of an EMD F3 ??,...or even an F7 ??
Would it have had any type of "white" light for backing ??? A "red" light for a warning/beacon light ???
-Keith
Posts: 894
Threads: 56
Joined: Mar 2015
I think any lighting on the B or even on the back of the A was railway specific. Canadian National had a small light on the left side-ends of their B's and one on the back left of their A's
<!-- m --><a class="postlink" href="http://www.cnrphotos.com/gallery2/main.php?g2_itemId=33961">http://www.cnrphotos.com/gallery2/main. ... emId=33961</a><!-- m -->
Posts: 2,423
Threads: 63
Joined: Dec 2008
ePaw has prototype photos -- one example about 4 posts in
<!-- l --><a class="postlink-local" href="http://www.bigbluetrains.com/forum/viewtopic.php?f=3&t=5061">viewtopic.php?f=3&t=5061</a><!-- l -->
David
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.
Posts: 2,724
Threads: 160
Joined: Dec 2008
Well most of the pictures that I had posted here have been lost to the abiss with the last update. But, as was stated earlier the lighting is railroad dependent. At a minimum, a head light at each end is required. Our F-3b was originally owned by the Boston & Maine. The head lights are controlled manually from a switch located inside each of the end doors, other railroads may have a different system. Hope that helps.
My other car is a locomotive, ARHS restoration crew
Posts: 2
Threads: 1
Joined: Feb 2013
Thanks very much for the info and pics,...this has been most helpful and interesting !!!
Sent from my iPad using Tapatalk
Posts: 2,423
Threads: 63
Joined: Dec 2008
A supplementary question, Mr. Speaker.
Did any roads use removable headlights that fit over a hook of some sort and could be moved to where needed? Or were they all bolted on?
David
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.
Posts: 894
Threads: 56
Joined: Mar 2015
Again, it might have been railway specific. Its best to find pictures of your prototype and go with that.
I also know that Canadian Railways originally used ditch lights that were removable and used in the mountains, so with that example there is probably a prototype for anything.
Posts: 2,423
Threads: 63
Joined: Dec 2008
To amplify what I said, I may have been thinking of RDCs. A lot of RDC pictures show a light on the front door, just below the window. Other pictures don't have a light. The ones with headlights are all CPR. I found a picture of a CP RDC with an upside-down U shaped handrail on the door that the light would be hung from.
David
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.