03-18-2012, 01:12 PM
I GOT IT OUT !!!I was drilling out a broken bolt. I planned on just drilling all the way through and getting a longer bolt with a nut 
. The original hole was only about 3/4 inch deep, I knew the threads would be destroyed. What I didn't realize, was there was another through hole going across the piece. When the drill broke through it was in 1/2 of the other hole. This caused it to bind up breaking the bit. I tried using the Dremel tool in both ways. When I tried it in the hole going across I saw the dril move. 
The grinding causes vibration 
it broke the drill loose. I got some needle nose pliers and 
:band2" 
. The original hole was only about 3/4 inch deep, I knew the threads would be destroyed. What I didn't realize, was there was another through hole going across the piece. When the drill broke through it was in 1/2 of the other hole. This caused it to bind up breaking the bit. I tried using the Dremel tool in both ways. When I tried it in the hole going across I saw the dril move. The grinding causes vibration it broke the drill loose. I got some needle nose pliers and :band2"
Les
<!-- m --><a class="postlink" href="http://www.lesterperry.webs.com/">http://www.lesterperry.webs.com/</a><!-- m --> Check it out
http://www.youtube.com/lesterperry/
<!-- m --><a class="postlink" href="http://www.lesterperry.webs.com/">http://www.lesterperry.webs.com/</a><!-- m --> Check it out
http://www.youtube.com/lesterperry/