12-02-2016, 12:17 AM
The basic module is made from some 3/4" plywood I had sitting around, I wanted it to be sturdy and also able to conform to my other Free-mo builds.
![[Image: IMG_2349.JPG]](https://3.bp.blogspot.com/-Ie6X1gSY4E4/WEEI740DF3I/AAAAAAAACaY/P5lnXP7jNFU8BHOtv93DTqpEyzBIQS1ggCLcB/s1600/IMG_2349.JPG)
The pieces where then glued and brad nailed together which made pretty quick work of it.
![[Image: IMG_2357.JPG]](https://3.bp.blogspot.com/-3mYkcAbOUDE/WEEJF3m_rfI/AAAAAAAACaw/MN1p8kPO6h8VA1Q4PFNFfNXWmQw7QK18gCLcB/s1600/IMG_2357.JPG)
I did not place a rib along the back as it did not seem necessary, I have two wall brackets and also to blocks holding the module up, which seems to be enough. The module is not really that heavy and does not hang out that far, also I do not plan on having to stand on it or having much weight so that has not been a concern.
The pieces where then glued and brad nailed together which made pretty quick work of it.
I did not place a rib along the back as it did not seem necessary, I have two wall brackets and also to blocks holding the module up, which seems to be enough. The module is not really that heavy and does not hang out that far, also I do not plan on having to stand on it or having much weight so that has not been a concern.