Posts: 9,763
Threads: 234
Joined: Dec 2008
I was back at it tonight for a while and when I looked at the addition I thought it looked like it would be too large for the area I have in mind. It appears to be about 36 feet long so I decided 24 would be plenty because it really doesn't appear to be a shop to work on more than one car at a time, so the front will be short a window. So I cut out the sides for it and installed the windows and doors.
It might be a while before I get back to it. My friend just brought me about 1200 slides that I want to scan for him. Starting in May of 1968. Lots of neat PC stuff too as well as Erie Lackawana Once they are done I will ask for permission to share.
Charlie
Posts: 9,763
Threads: 234
Joined: Dec 2008
Of course it isn't going to be exact because I don't want it on a grade but work continued for a while today. Things are glued together with a roof and some of the trim.
Charlie
Posts: 3,733
Threads: 44
Joined: Dec 2008
Good to see someone progressing!
Mike
Sent from my pocket calculator using two tin cans and a string
Posts: 9,763
Threads: 234
Joined: Dec 2008
Well, trim painting never was my forte' but a second coat will be needed as well as some scraping where it looks like I used a four inch brush. I should have waited for warmer conditions but I can repair my mistakes. I just had to keep doing stuff.
I have the sign glued to the polystyrene waiting for the glue to dry then I can cut it out and bolt it to the building.
For the roofing I can see in the original picture that it was corrugated metal so I used an old EIDE computer cable and burnished some aluminum foil over it to get the material
You have to pull the eraser in the same direction but it is a cheap way to make corrugated metal.
I want to try doing some with foil tape but I didn't have any on hand.
I have to wait for glue to dry to trim the edges and then a little roof coating and jut a tiny bit of rust.
Charlie
Posts: 9,763
Threads: 234
Joined: Dec 2008
Posts: 5,859
Threads: 175
Joined: Dec 2008
(04-01-2019, 08:50 PM)Charlie B Wrote:
.... I think it is going to be a neat little addition...
I totally agree, Charlie, and it fits right in!
Wayne
Posts: 11,784
Threads: 571
Joined: Nov 2008
Nice Charlie.
Don (ezdays) Day
Board administrator and
founder of the CANYON STATE RAILROAD
Posts: 3,733
Threads: 44
Joined: Dec 2008
Looks right at home!
Mike
Sent from my pocket calculator using two tin cans and a string
Posts: 9,763
Threads: 234
Joined: Dec 2008
Another project...
Charlie
Posts: 2,419
Threads: 63
Joined: Dec 2008
Charlie
which Aerotrain is that? I have one car from Varney.
David
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.
Posts: 9,763
Threads: 234
Joined: Dec 2008
(05-31-2019, 07:49 PM)BR60103 Wrote: Charlie
which Aerotrain is that? I have one car from Varney.
This is the bowser version. I understand they bought the varney molds.
Charlie
Posts: 3,733
Threads: 44
Joined: Dec 2008
Nice job on the roofing. Neat train.
Mike
Sent from my pocket calculator using two tin cans and a string
Posts: 11,784
Threads: 571
Joined: Nov 2008
Like the trestle, that shot is magazine worthy...
Don (ezdays) Day
Board administrator and
founder of the CANYON STATE RAILROAD
Posts: 9,763
Threads: 234
Joined: Dec 2008
(06-01-2019, 08:35 AM)ezdays Wrote: Like the trestle, that shot is magazine worthy...
The trestle was a gift from Railcop. I had to design the layout in that area so I could use it. He did a great job.
Charlie