02-20-2010, 01:22 PM
Prime Time!!!, well first primer at least, all the different colors were getting hard to take. Now I can see all the mistakes.... :o
The water "column" rotates across the tank, and forward to the fill trunk on the back of the crane. I found a fuel nozzle from an N.J.International detail set (two gas pumps) the hose is a piece from a GOW bulb.
Here, the crane and tender show the position of the platform w/r to the back of the crane.
This shot is all three; Boom flat, Crane,and Tender.
and this is the Boom flat, with the modified loco cab. This needs a lot more work,as it has had the least attention so far. I need to think about where and what steps, and handgrabs should be added, and this car gets all the "junk and clutter".
Now that all the parts are in primer I can correct the overlooked problems, and add the final details. Then comes the hard part.........the final color!
The water "column" rotates across the tank, and forward to the fill trunk on the back of the crane. I found a fuel nozzle from an N.J.International detail set (two gas pumps) the hose is a piece from a GOW bulb.
Here, the crane and tender show the position of the platform w/r to the back of the crane.
This shot is all three; Boom flat, Crane,and Tender.
and this is the Boom flat, with the modified loco cab. This needs a lot more work,as it has had the least attention so far. I need to think about where and what steps, and handgrabs should be added, and this car gets all the "junk and clutter".
Now that all the parts are in primer I can correct the overlooked problems, and add the final details. Then comes the hard part.........the final color!
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!