01-22-2013, 11:52 AM
I went ahead and added the cab floor, and a few of the cab interior details. The Throttle casting I have is for a "Front End Throttle" 
I'll have to scratch build the throttle. :o
The Main Steam Pipes are done, and the Air Compressor has been moved to the right hand side.
The injectors are mounted inside the cab, so I can run the water pipes to the top feed check valve. I was also able to build the firebox door, and get it in place. There's still some cutting and trimming to do, at the floor level,and a few more "cab interior bits" to install, before the cab can be permanently attached.
I'll have to scratch build the throttle. :o The Main Steam Pipes are done, and the Air Compressor has been moved to the right hand side.
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!