12-03-2015, 03:31 AM
The steel truck frames do solder fairly well with a HOT iron and an appropriate flux.
I use an old can of Kester brand flux (NOT ACID).
A good scrub with steel-wool helps.
I've lost count of the number I've done over the years.
I've also soldered directly to the bronze axle journal bearings.
Dan M.
I use an old can of Kester brand flux (NOT ACID).
A good scrub with steel-wool helps.
I've lost count of the number I've done over the years.
I've also soldered directly to the bronze axle journal bearings.
Dan M.