Posts: 4,553
Threads: 100
Joined: Dec 2008
" I built the gate in one piece to make it easy, but I will be using my utility knife to separate them, leaving them slightly crooked for interest. "
That solves the background problem, adds "interest", and increases "plausibility" ( there wasn't much "turning room" for a truck of any size to get to that door.)
And....It looks good !!!
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
Posts: 612
Threads: 14
Joined: Dec 2008
06-15-2010, 05:43 AM
(This post was last modified: 03-24-2020, 04:36 PM by Steve.)
Gary, Josh, and Pete....thank you!
it was brought to my attention that the diagonal braces were put on incorrectly (high side should be away from the post/low side at the post). I appreciate the feedback and have made the appropriate changes.....now I need to change a set of doors on my Coal House
I am now starting to re-plant the trees.......I broke a couple taking them out . Hopefully the damage is all repairable
Steve
Posts: 2,458
Threads: 57
Joined: Dec 2008
Holy smoke..!! That is absolutely great..!! I like the look of that trackwork...It's got nice flowing lines...
Gus (LC&P).
Posts: 612
Threads: 14
Joined: Dec 2008
06-18-2010, 11:24 PM
(This post was last modified: 03-24-2020, 04:43 PM by Steve.)
Steve
Posts: 5,263
Threads: 195
Joined: Apr 2009
Absolute outstanding It was time to come back from vacation to see your new photos
Reinhard
Posts: 3,683
Threads: 118
Joined: Jan 2009
Steve, the fence and the debris in the area look great, and a great job on hiding the backdrop/layout joint. What brand of pallets did you use. They also look realistic. Overall, the scene looks very believable.
Reinhard, good to have you back! Hope you enjoyed your vacation.
Three Foot Rule In Effect At All Times
Posts: 4,553
Threads: 100
Joined: Dec 2008
OK, now I'll take up knitting ! Oh, wait, I'm hand cutting and applying individual shingles.....I don't need knitting.
This looks infinitely better than what was there before! Absolutely no doubt this was the right choice.....and it certainly doesn't hurt that you're executing all the details beautifully !
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
Posts: 612
Threads: 14
Joined: Dec 2008
Reinhard...thank you....and welcome back!
Gary... thank you ...I used pallets/skids from Tichy:
http://www.tichytraingroup.com/index.php...ry=Details
They give you "skids" and some bottom pieces to make full pallets. I just used the bottom pieces as "filler" because I'm cheap and needed more "stuff" lying around
Pete...you are way too kind :oops: ......but that doesn't mean you have to stop! Thank you for all of your thoughts and encouragement through the years btw
Steve
Posts: 2,966
Threads: 158
Joined: Dec 2008
that is a great looking scene. One of these days, I will get a few scenes on my layout to that stage
--
Kevin
Check out my Shapeways creations!
3-d printed items in HO/HOn3 and more!
<!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
Posts: 1,817
Threads: 27
Joined: Dec 2009
Steve!
The caliber of modeling that is exhibited on this forum is :jawdrop: !
I have been subscribed to this thread since I read my way through from entry #0001 and I can only sit, sip my coffee and marvel at the images on my laptop screen! This is the level of model work that I aspire to. Hopefully, one day some new guy on this forum will priase my work as I have done yours and that of Sumpter250 and Doctorwayne and Gary S. and CNW1961 and... well, the list goes on and on and on ...
Images like the ones on this thread are the kind that the longer that you "look into them," the more that you see.
Amazing!
biL
Lehigh Susquehanna & Western
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves." ~~Abraham Lincoln
Posts: 2,458
Threads: 57
Joined: Dec 2008
!!..Just gorgeous junk..!!
BTW....What's the logic behind the placement of the diagonal braces on those doors..??
Gus (LC&P).
Posts: 5,859
Threads: 175
Joined: Dec 2008
Posts: 612
Threads: 14
Joined: Dec 2008
Kevin....don't feel bad, it has taken me 4 1/2 years to finally get a scene "mostly" detailed :oops: Just hang in there
Gus...I used to know about gate and large door bracing but have apparently become senile in my "old" age. Here is how diagonal braces work (as quoted by the person who pointed this out to me):
Quote:When it comes to diagonal bracing on a gate the brace should begin at the top opposite the hinge side. The downward force this way is carried by the bottom of the post which is very solid.
I should have remembered this especially since I was a steel fabricator for many years.....but somehow my "knowledge" just never was applied to my modeling. :?
biL said:
Quote:This is the level of model work that I aspire to. Hopefully, one day some new guy on this forum will priase my work as I have done yours and that of Sumpter250 and Doctorwayne and Gary S. and CNW1961 and... well, the list goes on and on and on ...
biL...first of all, thank you for the very gracious words
If you care enough to try and do your best each time you do a project, there is no doubt in my mind that similar (and better) results will follow. We are fortunate to model in the age of the internet, with a vast wealth of knowledge and almost instantaneous feedback available at our fingertips. The learning curve has really been shortened because of this. I ask questions, I ask for feedback, and what I lack in imagination, I make up for in taking advice to heart and running with it. This scene for instance, shaped up the way it has because of feedback and advice received right here, and also by email, from better modelers than me. I also read alot and scan the web for pictures, both prototype amd mrr. I have literally 1000's of pics on my computer related in some way to the hobby.
But most importantly of all...................keep it fun!
Good luck
Steve
Posts: 612
Threads: 14
Joined: Dec 2008
Thanks Wayne!
Steve
Posts: 250
Threads: 12
Joined: Dec 2008
Excellent Steve.
It looks a very credible scene...The trees break up the fence, and I love the attention to detail with the old fence and various bits of junk lying around. At first glance the eye may not pick up the finer details, but I think the subconscious does, and it's that message that goes to the brain that makes a scene believable and makes you want to go back take it all in bit by bit.
Great stuff.
Jack
LIFE....
..... Abandon the search for truth
Look for a good fantasy
|