Posts: 899
Threads: 85
Joined: Jan 2012
Im trying to recreate ECOX box cars which were used to transport baled garbage. On the sides of the box cars they made 2 square holes for vents. I want to use these vents...<!-- m --><a class="postlink" href="http://www.walthers.com/exec/productinfo/173-353">http://www.walthers.com/exec/productinfo/173-353</a><!-- m --> and cut them to size. The box cars im using are the Walthers 60' Double-Door Auto Parts Box Car. My question is how would i go about making even square holes in the side of the box car to insert the brass vents?? This is what the cars look like and the vents are in the upper sides of the car.
Posts: 1,897
Threads: 40
Joined: Dec 2008
Drill a round hole about the correct size. Then use a small square or triangle file to make the corners.
Posts: 899
Threads: 85
Joined: Jan 2012
Russ Bellinis Wrote:Drill a round hole about the correct size. Then use a small square or triangle file to make the corners.
As soon as the vents come in im going to give that method a try, thanks for the tip.
Posts: 2,271
Threads: 155
Joined: Dec 2008
You might consider NOT making the holes. Paint a black square and glue the vent over it, creating the illusion of ventilation.
Andrew
Posts: 1,992
Threads: 81
Joined: Dec 2008
Russ Bellinis Wrote:Drill a round hole about the correct size. Then use a small square or triangle file to make the corners.
I second Russ's suggestion. The only hard part will be getting the holes on target.
Modeling New Jersey Under the Wire 1978-1979.
Posts: 899
Threads: 85
Joined: Jan 2012
MasonJar Wrote:You might consider NOT making the holes. Paint a black square and glue the vent over it, creating the illusion of ventilation.
Andrew
i thought of that but then the vents wouldnt be flush with the side of the car and i know that would bother me to no end. ill post the outcome so if i mess up you can say "i told you so"
Posts: 899
Threads: 85
Joined: Jan 2012
I just got one of the boxcars done, i thought they would come out a little better but the brass parts bent easily so the next ones i just have to be more patient. Hopefully when i paint it it will look better