10-07-2019, 05:32 PM
10-09-2019, 04:49 AM
10-09-2019, 07:06 AM
I like the effect. It does look like a stucco finished structure to me. At one time it was done when a building really needed serious brick pointing and it was faster and cheaper to just stucco the whole structure unless the owners were trying to remain historically correct. They did this to an old brewery in East Liverpool which helped save the building years ago, but I think it would look great without the stucco. [attachment=32483]Charlie
10-12-2019, 02:38 PM
10-14-2019, 04:25 AM
Reinhard,I simply love that cold storage building.. Of course that blue and grey curved building is a eye catcher as well.
10-16-2019, 10:29 AM
10-17-2019, 02:33 AM
Very nicely done I like it..
I do have a question though.
That company only receives one car at a time? I would allow two car spots with room to pull the empty car forward so the second car can be unloaded. A simple car puller (looks like a overgrown winch) would be use to move the cars
I do have a question though.
That company only receives one car at a time? I would allow two car spots with room to pull the empty car forward so the second car can be unloaded. A simple car puller (looks like a overgrown winch) would be use to move the cars
10-17-2019, 04:07 AM
10-17-2019, 09:22 AM
Larry, there are four outlets to connect hoses to the gray piping system. The track is long enough to have two cars with hoses attached to the pipes. I am inspired by a facility like this US-Systems-Railcar-Unloading-with-Header-1024x768.jpg
A medium gray rattle can session followed by intense dry brushing to get the concrete base color followed by a long grid filing session.
[/url]
[url=https://flic.kr/p/2hwuzLM]
A medium gray rattle can session followed by intense dry brushing to get the concrete base color followed by a long grid filing session.
[/url]
[url=https://flic.kr/p/2hwuzLM]
10-17-2019, 05:33 PM
Reinhard,Cool! As I said I really like that building.. I should have looked closer at the first photo you posted.
You did give me a idea for unloading pellets at General American Plastics.
I'm planning to rename G.A.P to Ohio Polytech Corp since General American Plastics sounds to plain jane.
You did give me a idea for unloading pellets at General American Plastics.
I'm planning to rename G.A.P to Ohio Polytech Corp since General American Plastics sounds to plain jane.
10-17-2019, 08:14 PM
Great-looking structures, Reinhard! Big enough to look like they're deserving of rail service, too.
Wayne
Wayne
10-18-2019, 01:00 PM
10-18-2019, 04:19 PM
Reinhard,
Impressive structures. Do you need to reinforce the interiors to prevent warping, or is the foam core sturdy enough by itself? Also on the cold storage building are the raised portions also foam core or did you use styrene?
Bruce
Impressive structures. Do you need to reinforce the interiors to prevent warping, or is the foam core sturdy enough by itself? Also on the cold storage building are the raised portions also foam core or did you use styrene?
Bruce
10-19-2019, 03:16 AM
Bruce, it is all foam.
Warping is a two fold problem.
a. the entire structure needs a coat of primer from the rattle can because the following paint is water based and would warp it like crazy. I had that problem with the left invisible wall of the ice storage. Saved the primer from the rattle can but painted it. I had the cut the wall out next morning and insert a nw one.
b. The ice storage is made of very thick material and has no extra enforcement. The new building is much more fragile due to all the windows and the grid design. I am just at this moment glueing the parts together (wall are done, roof is setting) and add enforcement from the inside.
The last four "shoe box" buildings have a roof of 1cm thick foam core. That kind of roof is very stable and the 3mm walls rely on the roof. The new building has a 3mm roof (less space over the top window row) and that needs extra support too.
Warping is a two fold problem.
a. the entire structure needs a coat of primer from the rattle can because the following paint is water based and would warp it like crazy. I had that problem with the left invisible wall of the ice storage. Saved the primer from the rattle can but painted it. I had the cut the wall out next morning and insert a nw one.
b. The ice storage is made of very thick material and has no extra enforcement. The new building is much more fragile due to all the windows and the grid design. I am just at this moment glueing the parts together (wall are done, roof is setting) and add enforcement from the inside.
The last four "shoe box" buildings have a roof of 1cm thick foam core. That kind of roof is very stable and the 3mm walls rely on the roof. The new building has a 3mm roof (less space over the top window row) and that needs extra support too.
10-19-2019, 07:25 AM